BPDLM - CO65, COBALT OXIDE

  • MSDS: BPDLM
  • Manufacturer: SPEX INDUSTRIES INC
  • Product Name: CO65, COBALT OXIDE
  • National Stock Number: 6810-00N030023
Product Identification

Product ID:CO65, COBALT OXIDE
MSDS Date:06/08/1989
FSC:6810
NIIN:00N030023
MSDS Number: BPDLM

Responsible Party
SPEX INDUSTRIES INC
3880 PARK AVE
EDISON, NJ 08820
US

Emergency Phone: 908-549-7144

Info Phone: 908-549-7144

Preparer: LINDA OLCHUARY

Cage: 07977

Contractor
SPEX CERTIPREP INC
METUCHEN, NJ 08840 US

Telephone: 732-549-7144

Cage: 07977

Ingredients

COBALT (2+) OXIDE; (COBALT OXIDE)

CAS: 1307-96-6

RTECS: GG2800000

Fraction By Weight: 100%

OSHA PEL 0.05 MG/M3 (CO)

ACGIH TLV: 0.05 MG/M3 (CO)

Hazards

LD50 LC50 Mixture:LD50:(ORAL RAT) 202 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:THIS MATERIAL MAY BE HARMFUL IF
INHALED, INGESTED OR CONTACTED W/SKIN OR EYES. CONTACT W/SKIN CAN
CAUSE DERMATITIS OR IRRITATION. CONTACT W/EYES CAN BE IRRITATING.
INHALATION CAN IRRITATE THE MUCOUS M EMBRANES & UPPER RESPIRATORY
TRACT.
Explanation of Carcinogenicity:COBALT OXIDE IARC GROUP 2B.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:IF IRRITATION CONTINUES, GET MEDICAL ATTENTION
IMMEDIATELY.EYE:FLUSH W/WATER FOR AT LEAST 15 MINS OCCASIONALLY
LIFTING UPPER & LOWER EYELIDS. SKIN:REMOVE CONTAMINATED CLOTHING,
THEN FLUSH W/WATER FOR AT LEAST 15 MINS. WASH CLOTHING THOROUGHLY
BEFORE REUSE. INHAL:MOVE TO FRESH AIR. INGEST:CALL MD IMMEDIATELY .

Fire Fighting

Flash Point:NOT COMBUSTIBLE
Extinguishing Media:APPROPRIATE TO SURROUNDING FIRE CONDITIONS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:EVACUATE & VENTILATE AREA. SWEEP UP & PLACE IN
BAG; HOLD FOR PROPER DISPOSAL. WEAR PROTECTIVE CLOTHING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY AREA IN A TIGHTLY
SEALED CONTAINER. PROTECT FROM MOISTURE SINCE MATERIAL IS
HYGROSCOPIC. IRRITANT.
Other Precautions:AVOID INHALATION, INGESTION AND CONTACT W/EYES &
SKIN.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:CHEMICAL FUME HOOD.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LAB COAT & CHEMICAL RESISTANT CLOTHING.
Work Hygienic Practices:WASH CAREFULLY AFTER USE.
Supplemental Safety and Health
MP:1795 +/- 20

Chemical Properties

HCC:T6
Melt/Freeze Pt:M.P/F.P Text:SUPP DATA
Spec Gravity:6.45
Solubility in Water:INSOLUBLE
Appearance and Odor:PINK POWDER.

Stability

Stability Indicator/Materials to Avoid:YES
REDUCING AGENTS & MOISTURE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES.

Disposal

Waste Disposal Methods:CONTACT LOCAL HAZARDOUS OR CHEMICAL WASTE
DISPOSAL AGENCY FOR REGULATIONS. DISPOSAL MUST BE IN ACCORDANCE
W/FEDERAL, STATE & LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.